PDA

View Full Version : Job #2 "Commonized" trucks


HeavyAssault
10-21-2006, 09:47 AM
What's the latest news for the Job2 trucks? I'm hoping to get some better performance from the SCT.
PSDPlayer
10-21-2006, 12:07 PM
Latest news? They run good. 30-32 psi of boost. What more do you want to know?
HeavyAssault
10-30-2006, 01:37 PM
Well I have tried the files you have sent and find the tranny shifts are CrAzY at WOT. I pulled onto the hwy and had to hit the pedal hard. As the truck built up speed the tranny started shifting bad. Kinda like it was hitting the rev limiter.

I have gotten a power file from you which works well at low throttle, but nothing seems right at WOT.
PSDPlayer
10-30-2006, 11:21 PM
Let me look back through it.
HeavyAssault
11-06-2006, 03:43 PM
Did you happen to find anything unusual with the file?
PSDPlayer
11-07-2006, 04:01 PM
Not really the file. More like the code. We switched the codes in a couple of job2 trucks back to 05 codes and they seem to respond better to tunes.
HeavyAssault
11-08-2006, 09:21 AM
So how does all that affect the new reflash that is out?

At some point I'm going to recal the ABS for the 35" tires, when I bring it in I know they are going to reflash the PCM at the same time.
PSDPlayer
11-08-2006, 11:34 AM
EVERY calibration that is released now will have the spool valve cycling when the motor is shut off.