filet replacement??

[EPDP99]

anyone heard of this filter??
http://www.btgmotoring.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=AF16411&Category_Code=

looking at the airraid but just searching and found this

[mikeym]

id tell you to just get a airaid replcement filter, bout 50 bucks. the housing in the link is no different than the factory piece, just metal. which means it will hold in heat, which is bad. not to mention costs 5 times as much...

do the zoodad and a drop in airaid filter. youll have 50-60 bucks invested, and it flows just as good as anything else. i like everything to look stock anyways, personally...

[mooring product]

id tell you to just get a airaid replcement filter, bout 50 bucks. the housing in the link is no different than the factory piece, just metal. which means it will hold in heat, which is bad. not to mention costs 5 times as much...

do the zoodad and a drop in airaid filter. youll have 50-60 bucks invested, and it flows just as good as anything else. i like everything to look stock anyways, personally...

Your not doing a good job at keeping it looking stock

[PSDPlayer]

Airaid is the same price sitting on your door step. There is a reason I have one in all 3 of my trucks. Keep in mind that I can get anything I want.

[_CH_]

Airaid is the same price sitting on your door step. There is a reason I have one in all 3 of my trucks. Keep in mind that I can get anything I want.

can ya get this?

http://www.heicosportiv.de/mainframe.asp?lang=de&e1=210

i might be serious....who knows :D

[PSDPlayer]

If it was in english I would become a dealer.

[_CH_]

If it was in english I would become a dealer.


:eek: thats what i call service!:D
granted its not for a ford (technically speaking).... but still http://www.competitiondiesel.com/forums/images/smilies/bow.gif

[EPDP99]

best to do drop in filter or buy the intake box?

[heinzboy]

best to do drop in filter or buy the intake box?

full airraid.

[mikeym]

why open up your airbox to all that heat in the engine bay? ok put a lid on it to keep the heat out. now hows it any different than a factory box?

[_CH_]

'cause its purty

[PSDPlayer]

Mikey what hot air gets into the airaid? Are you talking about at idle? Once the truck is going like 2mph the air inlet temp is the same as outside ambient temp.

[mikeym]

i find that hard to believe. then why does everyone spend time and money to make lexan covers for the top of the airaid? if that were also the case, the zoodad mod would be a waste, and it has been recorded to lower temps pretty substantially...

[PSDPlayer]

Come on down and I show you. All you have to do is look at IAT1 and record it at idle, and then start moving forward. Or Im lying to you mikey in an attempt to sell AirAids. Stupid me I could have reduced my inventory costs by jut getting drop in replacements instead of all those big damn boxes.

[UNBROKEN]

I monitor IAT temps on my truck. Yes, it goes up when I'm sitting still...but drops right down to about ambient when I'm rolling.
I have about the most open filter box design you can have too.

I know the reason I personally put a top on my old Airaid was just because I liked the way it looked. I had it cut out of 1/4" thick aluminum and polished it up. It looked sweet IMHO...had nothing to do with heat.

[heinzboy]

If your truck pukes likes mine, The cover will help keep the coolant out of the filter.

[mooring product]

I'm building a top for mine out of aluminum and having flame decals put on it. The rubber lip looks like crap. Must be from all the anti freeze pooring all over it. I'll post my pics when i get it done unless it looks like shit.

[_CH_]

If your truck pukes likes mine, The cover will help keep the coolant out of the filter.

:eek:

[mooring product]

I made one last night out of aluminum. I think I should have done it in black to match the air box. How the hell do you take the picture and move into the message?

[heinzboy]

I made one last night out of aluminum. I think I should have done it in black to match the air box. How the hell do you take the picture and move into the message?

upload your pic on the webiste and post the link.

[mooring product]

Its on the website but how do I take it from the photo area and place it in the message?

[Abrannan19]

if you are using FireFox as a browser for some reason it will not allow you to "copy to clipboard" like iE will..I asked Doug about it yesterday he said FF maybe missing a plugin..I have no clue which one it is..but here is the picture Pete was talking about

And yes..I think black would have looked better IMO

http://www.gogodiesel.com/forum/photopost/data//500/medium/Intake_cover.jpg