View Full Version : Gauge hook ups
mattsn
04-07-2007, 08:26 AM
Hey guys, just bought a bunch of guages from doug, just curious as the best places to connect the trans? water? and boost . are there sensors i can tap into and if so whear are they? or drill and tap all of them ? Thanks
Abrannan19
04-07-2007, 08:44 AM
there is a port on the side of the trans right above the pan..that's where everybody does that gauge. the boost should be drilled into the intake elbow,don't mess with the map line if someone reccommends that route you could get needle flutter as well as damage the map. for the water temp put a T in the heater hose line and go from there. mine is tapped directy to where the water goes into the oil cooler but its not easily accesible and I don't know if you can get to it with the motor assembled. you can look at my pics on the site.
mattsn
04-07-2007, 10:16 AM
cant seem to get into your pics. but thanks for the info. what side of the trans is that port?
Abrannan19
04-07-2007, 10:27 AM
driver side
http://www.gogodiesel.com/forum/photopost/showgallery.php?cat=500&ppuser=141
strokedout
04-08-2007, 04:26 PM
Does anyone make a display that can monitor via the trucks internal electronics. I currently have the banks PDA and can monitor just any engine stat. I plan to go to the SCT but want to have guages too before running it hard.
heinzboy
04-08-2007, 04:44 PM
Does anyone make a display that can monitor via the trucks internal electronics. I currently have the banks PDA and can monitor just any engine stat. I plan to go to the SCT but want to have guages too before running it hard.
Like this? http://www.sctlivewire.com/lwmain.php
Abrannan19
04-08-2007, 05:31 PM
from what I have read the livewire is shit.
banksforddiesel99
04-08-2007, 05:35 PM
shit as in good or bad adam?
heinzboy
04-08-2007, 05:36 PM
he is talking about being BAD as it sucks.
Wildcat
04-17-2007, 04:51 PM
why does it suck?
heinzboy
04-17-2007, 05:34 PM
Why do you really need it if you already have gauges? Hell, how come they release it to the public when there is no pyro probe?
Abrannan19
04-17-2007, 11:00 PM
no pyro probe STILL and its been released for what 3-4 months..and no software for custom tunes yet
SINNER
04-17-2007, 11:03 PM
i dont see the point. display sucks too no color what is this 1980
PSDPlayer
04-18-2007, 06:04 PM
I could have sworn I said skip it like 8 months ago.
mattsn
04-18-2007, 07:38 PM
I could have sworn I said skip it like 8 months ago.
Skip what?? who you talking to ??
maxx355
04-18-2007, 09:08 PM
Mattsn, If you pm me I can bring my truck down since we are close and you can see how I did it.
Skip what?? who you talking to ??
skip the livewire
01 250
04-25-2007, 11:02 AM
Ok, I think I need to get some guages, or at least everyone said I need them. Truck is an 07 w/ dougs tunes on the SCT and a 4" MBRP exhaust, no cat. I have the tranny and engine temp and boost guage stock so I don want to mess with that. I should get the EGT but what else???? How do i hook it up and where the heck will I put it. Truck has the handle on the pillar unless I can get it above or below that.
Abrannan19
04-25-2007, 11:50 AM
just get a single pillar guage. then you can keep your grab handle.
for egts you drill and tap the exhaust manifold,install the probe and find a power source and tap into the dimmer switch.
01 250
04-25-2007, 01:02 PM
you mean the downpipe after the turbo?
Abrannan19
04-25-2007, 01:22 PM
no. I mean the exhaust manifold. if you look on the driver side down low bolted to the block its normally rusted I will take picture later.
Ok, I think I need to get some guages, or at least everyone said I need them. Truck is an 07 w/ dougs tunes on the SCT and a 4" MBRP exhaust, no cat. I have the tranny and engine temp and boost guage stock so I don want to mess with that. I should get the EGT but what else???? How do i hook it up and where the heck will I put it. Truck has the handle on the pillar unless I can get it above or below that.
the stock ones (other than boost) arent worth a darn.
just get a single pillar guage. then you can keep your grab handle.
for egts you drill and tap the exhaust manifold,install the probe and find a power source and tap into the dimmer switch.
get a single for the steering wheel as well for a trans temp. You could also do a dash mount or a mirror mount if you want 3 and want em all together
and as he said, if you tap the dp youll get funky readings
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.