View Full Version : 12.9's #2 only stock turbo LLY CCSB
skintback
03-14-2008, 01:23 PM
I know it's been done before by others, just not by me on the stock turbo and #2 only until the other night at moroso. I was able to pull out two 12 sec. passes the first one was 12.98 at 104 and the second one was 12.94 at 103. I had a bunch of 13.0 and 13.1. It's all about that first 60 feet and they were 1.84 and 1.76. I had a great time hope to see some more diesels there next time. :gr_cheers:
mooring product
03-14-2008, 01:30 PM
Nice times...I wounder what it would run on NOS.
skintback
03-14-2008, 01:59 PM
Some have gone into the high to mid 11's on the same set up i have using a .80-.125 dry shot
My momma told me to stay away from drugs ;)
mooring product
03-14-2008, 04:01 PM
Sniff sniff...yup drugs are bad, but they sure are fun.
skintback
03-14-2008, 04:44 PM
I just weighted the thing and with me in it 6920lbs. I might just have to pull the hitch and front and back seats out of it too see just how fast it will go stripped down
Stockhp
03-14-2008, 06:19 PM
Where's the slips and video I call Bullshit.:nutkick:
skintback
03-14-2008, 09:34 PM
Whats wrong STOCK PEE WEE you scared of a lilly that is a tenth behind you and weights more with 50 less HP and 40 less ft lbs.:banging:
P.S. shes still on a diet;)
Abrannan19
03-14-2008, 10:01 PM
you doing your own EFI live tuning?
skintback
03-15-2008, 10:06 AM
No it was a tune that someone gave me and it went 12.8's in his truck and runs damn good in mine i take no credit for the tuning
heinzboy
03-15-2008, 04:52 PM
I just weighted the thing and with me in it 6920lbs. I might just have to pull the hitch and front and back seats out of it too see just how fast it will go stripped down
DAMN, THEM chevys made of plastic or what? I wish I had a truck weigh under 7500 pounds.
skintback
03-16-2008, 03:12 PM
Plastic fender moldings is about it and you can make them all weight about the same with the right diet
Shorted 2 Cylinders
03-16-2008, 08:46 PM
I don't know it sounds a little fishy. U might have a exhaust leak in to ur cab. Were's the slip
outlaw422
03-21-2008, 12:57 PM
Nice times...I wounder what it would run on NOS.
just like sonny said the only bottle you will see in his truck is the vodka bottle laying in the back seat..haha
mooring product
03-21-2008, 07:48 PM
Make sure its secure..If you get SKY vodka people may think its NOS but don't worry I'll help ya drink it.
VERYFAST6.0
03-22-2008, 12:32 AM
Sounds like a good idea Pete
skintback
03-22-2008, 11:15 AM
Just bring your own glasses guys, I don't have anything against nitrous or people that choose to use it remember it is a racing tool I just want to run on #2 only it's less headache and the amount i would like to spay i would need rods so I'll just play it safe for a while. See ya'll at the track
mooring product
03-22-2008, 12:06 PM
Blah blah blah . Just bring the Vodka and I'll show you how to run it. I will say you may need to watch the exhaust in the morning, it may spit and be a little hot. A little pink will help with this. :hehe:
This from the guy that can't figure out how to get his truck into 4x4.
skintback
03-22-2008, 04:44 PM
Thats a :badidea: :hehe:
03F250Stroke
05-23-2008, 06:08 AM
i ran against a duramax at the track and he ran a 13 flat on a tuner and exhaust..thats it. oh and a built trans..my uncles 07 is pretty quick for a bone stock truck, def quicker then my 6.0 when it was stock
01txdmax
07-08-2008, 04:15 AM
nice times, i hope to be there soon....
SICKS-O
11-09-2008, 05:40 AM
what are the rods good to on the dmaxs? did they ever change em between lb7 to lmm?
SINNER
11-09-2008, 06:48 AM
Plastic fender moldings is about it and you can make them all weight about the same with the right diet
Bullshit. You forgot about the plastic front ends they put under those ricer diesels.
!!!PainTrain!!!
11-09-2008, 11:43 AM
Bullshit. You forgot about the plastic front ends they put under those ricer diesels.
Hook to a sled and wind up having a pigeon toed front end walking down the track LMAO.
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.