PSDPlayer
04-10-2008, 07:13 AM
<TABLE cellSpacing=3 cellPadding=0 width="100%" border=0><TBODY><TR><TD vAlign=top align=left>Application: Livewire 9621/9623</TD></TR><TR><TD vAlign=top align=left>Current Version:1.47</TD></TR><TR><TD vAlign=top align=left>Last Updated:04-04-2008</TD></TR><TR><TD vAlign=top align=left>Description:</TD></TR><TR><TD vAlign=top align=left>Note: The software drivers for Livewire/X3 must be downloaded and installed before you connect your Livewire/X3 to your PC (see below).
Livewire / X3 Updater Software is a software program that runs on a PC.
Livewire / X3 Updater is used to perform 3 major functions:
1) Update Livewire/X3 Firmware Version
2) Update Livewire/X3 Preprogrammed Tune Revision
3) Load LL3 files onto a Livewire/X3</TD></TR><TR><TD vAlign=top align=left>Notes:</TD></TR><TR><TD vAlign=top align=left>To update your Livewire/X3's Firmware:
1) Download and install the software drivers for Livewire/X3.
2) Download and install Livewire/X3 Updater Software.
3) Download and save the latest firmware for Livewire/X3.
4) Setup X3/Livewire for a firmware update:
X3 -> Press and hold the Cancel button on the X3 device while plugging in the USB Cable Livewire -> Press and hold the Jog button (big round button) on the LW device while plugging in the USB Cable. 5) Run Livewire / X3 Updater software and select Update Firmware.
6) Select the firmware file when prompted (*.LWU).
7) The firmware update will begin transferring the new firmware to your device. Note: If you are NOT performing a firmware update DO NOT hold any buttons while plugging the device into the PC.</TD></TR></TBODY></TABLE>
Livewire / X3 Updater Software is a software program that runs on a PC.
Livewire / X3 Updater is used to perform 3 major functions:
1) Update Livewire/X3 Firmware Version
2) Update Livewire/X3 Preprogrammed Tune Revision
3) Load LL3 files onto a Livewire/X3</TD></TR><TR><TD vAlign=top align=left>Notes:</TD></TR><TR><TD vAlign=top align=left>To update your Livewire/X3's Firmware:
1) Download and install the software drivers for Livewire/X3.
2) Download and install Livewire/X3 Updater Software.
3) Download and save the latest firmware for Livewire/X3.
4) Setup X3/Livewire for a firmware update:
X3 -> Press and hold the Cancel button on the X3 device while plugging in the USB Cable Livewire -> Press and hold the Jog button (big round button) on the LW device while plugging in the USB Cable. 5) Run Livewire / X3 Updater software and select Update Firmware.
6) Select the firmware file when prompted (*.LWU).
7) The firmware update will begin transferring the new firmware to your device. Note: If you are NOT performing a firmware update DO NOT hold any buttons while plugging the device into the PC.</TD></TR></TBODY></TABLE>