New intercooler install

[Goolsbymd]

here ya go for those that don't see it on the "other site" :jerkoff:
Old bottom boot (CAC to intake manifold)
http://i194.photobucket.com/albums/z268/Goolsbymd/002-10.jpg
The drip (about 90mins of draining)
http://i194.photobucket.com/albums/z268/Goolsbymd/009-1.jpg
Stock IC gone
http://i194.photobucket.com/albums/z268/Goolsbymd/003-8.jpg
installing "z" brackets (stuck foot in picture for refernce on where it is, the install picture sucks from Spearco)
http://i194.photobucket.com/albums/z268/Goolsbymd/005-3.jpg
Fully installed
http://i194.photobucket.com/albums/z268/Goolsbymd/006-3.jpg
http://i194.photobucket.com/albums/z268/Goolsbymd/008-2.jpg

Matt/Dave/Nate going to SSS? If so let me know well get a beer or few

[Abrannan19]

is that coolant on the underside of the hood?

[Goolsbymd]

Nah muddy water that had dried went muddin a few days ago and never got around to it.
however I am thinking about a CCV mod after seeing all that drip out.

[PSDPlayer]

The CCV mod is super easy on that truck. Im dissapointed the oil/air separator that is factory isn't working very well.

[720Deere]

Looks good Matt! I'm sorry to say I won't be making it to SSS this year. I was planning it all year but due to last minute events beyond my control I have to bail out on the trip. You'll be glad that you went, it's a good time. It should be a hoot this year with all the track action going on as well.

How much larger is that Spearco than the factory cooler? That thing looks huge for sure. Too bad we can't cover that much surface area on the 6.0s!

[!!!PainTrain!!!]

Looks good Matt! I'm sorry to say I won't be making it to SSS this year. I was planning it all year but due to last minute events beyond my control I have to bail out on the trip. You'll be glad that you went, it's a good time. It should be a hoot this year with all the track action going on as well.

How much larger is that Spearco than the factory cooler? That thing looks huge for sure. Too bad we can't cover that much surface area on the 6.0s!

I don't know Matt my Spearco is freaking huge compared to the dinky ass thing that was on it from the factory. Still that one looks bigger than mine so who knows. Goolsby's truck is taking a turn down the BB road, except without all the problems and let downs hahaha.

[Lord Tauk]

Wow, that thing is huge. It looks good.

[Goolsbymd]

lol im chasin' but its gonna be a while till i hit his times I think. The intercooler is freakin huge its about 2" longer, 1 1/2" wider and 1 3/4" thicker

[720Deere]

Hey Matt do you know about the NHRDA event at MIR in October? I think some of us may be heading down there for the weekend. I would have to look it up but I think it's Oct 12 or whatever that weekend is.

[06TWO50Diesel]

intercooler looks awesome Matt!
I as well won't be making it to the SSS this year. Trucks still down, and I broke my elbow. So things are moving too quickly for me haha We'll have to catch up soon though!

rig is coming out great matt! rocking

[!!!PainTrain!!!]

intercooler looks awesome Matt!
I as well won't be making it to the SSS this year. Trucks still down, and I broke my elbow. So things are moving too quickly for me haha We'll have to catch up soon though!

rig is coming out great matt! rocking

Broski! I wanted to let you know that I just now got your voicemail you left me lol. My other phone died and it took me three weeks to get a replacement. I still have the same number and all though. Sucks to hear about your elbow though.

[Goolsbymd]

CCV Mod done. Not as pretty as the other one posted but its done :p

[!!!PainTrain!!!]

CCV Mod done. Not as pretty as the other one posted but its done :p

Nice I need to do that to mine as well. Don't like the idea of all that vapor and shit going down into my Spearco as well.:badidea:

[720Deere]

I definitely would not invest the money on a Banks or Spearco intercooler without doing a CCV reroute. I don't have any experience with the 6.4s but I know it's hit or miss with the 6.0s. I've seen some that nearly fill the intercooler with oil and others that barely show any signs at all. Maybe it's directly related to how the truck is driven.

[Goolsbymd]

Yea as soon as I took off that bottom boot and saw the oil drip out of the IC i knew CCV was gonna be needed.

[03F250Stroke]

i like how the intercooler sits in the front..if i had a 6.4 i could cut up the grill so you could see the i/c sitting in there!!

[720Deere]

Evan have you ever posted something and immediately thought "man that's gonna make me look like dumbass"?

[Lord Tauk]

i like how the intercooler sits in the front..if i had a 6.4 i could cut up the grill so you could see the i/c sitting in there!!

....Wow.

[!!!PainTrain!!!]

....Wow.

LOL Front Mount Nigga. Spray it with NAWZZZZ lower the intake temp...less danger to the manifold:rolleyes:

[!!!PainTrain!!!]

http://images.superstreetonline.com/eventcoverage/130_0611_03_z+sema_show+mitsubishi_lancer_evolutio n_front_mount_intercooler_view.jpg


http://lh4.ggpht.com/_TVVDdbRQQfg/SCx8A7N8XOI/AAAAAAAAGCE/lmMJcAX0m-Q/mechanic.jpg

[Lord Tauk]

LOL Front Mount Nigga. Spray it with NAWZZZZ lower the intake temp...less danger to the manifold:rolleyes:

You're lucky that shot of naws didn't break the welds on your intake manifold.

Now me and the mad scientist have the rip the block apart to fix the piston rings you fried.

[!!!PainTrain!!!]

You're lucky that shot of naws didn't break the welds on your intake manifold.

Now me and the mad scientist have the rip the block apart to fix the piston rings you fried.

Spoon Motors do pull a premium before race wars.

[Lord Tauk]

Ask any racer, any real racer. It don’t matter if you win by an inch or a mile, winning’s winning!

[!!!PainTrain!!!]

Bullshit, nobody likes the tuna here.

[03F250Stroke]

matt and dave, you 2 need to stop worrying about what i say and do and start worry about whos taking and whos giving..fucking homos

for now on daves new name is matts little bitch. MLB. i shorten it up for you. your like a little parrot. everything matt says you gotta say it too. matts funny we know. but you, you are like Karen.

[Lord Tauk]

matt and dave, you 2 need to stop worrying about what i say and do and start worry about whos taking and whos giving..fucking homos

for now on daves new name is matts little bitch. MLB. i shorten it up for you. your like a little parrot. everything matt says you gotta say it too. matts funny we know. but you, you are like Karen.


Too bad it took your slowass 10 minutes to edit your original post :upyours:

Your feeble attempts at owning me has yet again failed, and what you pointed out doesn't even make sense! :owned:

Bring Slow White to Cecil Friday, and I'll show you a "Parrot" who's taking and giving shit in and out, or whatever the hell you said! :blahblah1::hehe::hehe::hehe:

Shoot me a PM, I'll give you some details if you're inclined not to sit in the staging lanes at Atco for 3 hours!

[03F250Stroke]

whatever dude. dont be upset. owning? honestly i dont really care. its the internet. and come to cecil. you guys asked me to come to cecil and none of you even ran. slow white? what are you gonna race me in 3500 pound lightning because i know that fucking piece of shit 7.3 aint gonna beat me?

[Lord Tauk]

Yeah, I can't disagree with you there about your MPH and ET being faster, but I plan on hitting up the local speed shop this week for a quad stage nitrous shot.

I'm bringing a towstrap with me, I'll only get 1 full run. I'll need you to tow me down the return lane and into the parking lot.

[!!!PainTrain!!!]

Lol

[Abrannan19]

yall crack me up.

[!!!PainTrain!!!]

How well did the IC help out your EGTs? Did you loose any boost from it aswell?

[Goolsbymd]

I have only been drivin 7 miles to and from work and haven't romped it, but its dropped a good 200 or so id say, nothing to noticable on the boost.

[!!!PainTrain!!!]

That doesn't seem too bad. I thought the IC setup was going to address the problem with the one pipe that is pinched in there? Did your setup come with anything to fix/replace that pipe or just the IC?

[Lord Tauk]

yall crack me up.

We're only here to entertain you!

[Abrannan19]

Dave...I know Matt told you to say that..LOL

[!!!PainTrain!!!]

MLB...I know Matt told you to say that..LOL

there ya go Adam. I fixed it for you:jerkoff:

[Lord Tauk]

there ya go Adam. I fixed it for you:jerkoff:

Poor Gools, he has to be wondering WTF happened to his thread.

[!!!PainTrain!!!]

What else would you expect at gogo?

[03F250Stroke]

Poor Gools, he has to be wondering WTF happened to his thread.

I feel really bad, dave you really fuck gools thread all up LOL

[06TWO50Diesel]

wow- that intercooler is amazing hahaha thought i'd post something relevant in the thread rocking

[Goolsbymd]

lol I think its pretty funny, but I don't even remeber the questions asked in this thread after argument about whose internet penis is bigger, ill look again later.
http://i194.photobucket.com/albums/z268/Goolsbymd/Untitled-1.jpg

[Lord Tauk]

Who's arguing? I don't see any arguing in this thread!

[!!!PainTrain!!!]

Yea Evan is a dumbass? What's there to argue?



J/K Evan lol.

[03F250Stroke]

LOL listen to you Roberto

[Echo]

Hi everybody.

[!!!PainTrain!!!]

Hi everybody.

Where the hell you been son?

[Lord Tauk]

Yea Evan is a dumbass? What's there to argue?

EAT SHIT EVAN


Fixed it for you Roberto

[Echo]

Where the hell you been son?

I've been around, just haven posted in a while.