Live Link

[jschall]

Froggy every time I try and data log with my sct2 my laptop locks up on the vary first screen before It finds any pid's or anything...do you have a step by step of buttons to push or how to or what ..cause it's pissing me off....:eek:
no Im cool...but it would be nice to know wtf Im doing wrong....
jeff

[PSDPlayer]

What are you doing to the xcal2? Plug the xcal2 into the truck and then connect it to the laptop, then open the live link software.

[jschall]

That is what Im doing it comes to a screen that says get program ID and then it locks up...are my drivers not installed properly...that's all I can figure......I really want to get this down pat cause real soon we will need to do it with my planed mods......
jeff

[PSDPlayer]

Well now that we know you are running Windows Millenium and not XP. I think we need to try this using another computer. Or run windows update and see if it will download the .NET upgrades which the SCT software revolves around.

[jschall]

you smart ass ....my lap top is me...my home computer is xp...I will call you ..eek:
jschall

[jschall]

Live link 3 does work with windows ME....you just got to make sure your com port is assigned to the appropriate one for the usb port.....The frogster helps again.....you little green sweet heart....
jschall

[jschall]

Froggy ....
KOEO EP= 99kpa
KOER EP= 129kpa after warm settles to 117kpa at idle and climbs with rpm..
Map= 98.8
Baro= 96.8
Is my EBP fried or tube cloged with soot? I know that the SCT can direct what the EP is but does this sound right for a hot tune???

[1SickHarley]

Anyone know if LiveLink works with Windows Vista yet? I tried to get it to work on my new laptop and had difficulties.....

[PSDPlayer]

Not vista compatible on the tuning software so I didn't bother using the other stuff either.

[ciscofreak]

Froggy ....
KOEO EP= 99kpa
KOER EP= 129kpa after warm settles to 117kpa at idle and climbs with rpm..
Map= 98.8
Baro= 96.8
Is my EBP fried or tube cloged with soot? I know that the SCT can direct what the EP is but does this sound right for a hot tune???

Sorry to bump such an old thread but I'm looking for the units some of the Live Link data values. Is there a master list somewhere?

Thanks....

[Mike Hickman]

Live link 3 does work with windows ME....you just got to make sure your com port is assigned to the appropriate one for the usb port.....The frogster helps again.....you little green sweet heart....
jschall

Just don't kiss the FROG !!!:wrongforum: thats for the ADULT section :D